Tuesday, 24 April 2012

Hydrocarbon Ring Assemblies


Hydrocarbon Ring Assemblies

Rule A-51. Definition 

51.1 - Two or more cyclic systems (single rings or fused systems) which are directly joined to each other by double or single bonds are named "ring assemblies" when the number of such direct ring junctions is one less than the number of cyclic systems involved.
Examples to Rule A-51.1



See Recommendations'93 R-2.4.4

Rule A-52. Two Identical Ring Systems 

52.1 - Assemblies of two identical cyclic hydrocarbon systems are named in either of two ways: (a) by placing the prefix "bi-" before the name of the corresponding radical, or (b) for systems joined by a single bond by placing the prefix "bi-" before the name of the corresponding hydrocarbon. In each case, the numbering of the assembly is that of the corresponding radical or hydrocarbon, one system being assigned unprimed numbers and the other primed numbers. The points of attachment are indicated by placing the appropriate locants before the name.
Examples to Rule A-52.1




52.2 - If there is a choice in numbering, unprimed numbers are assigned to the system which has the lower-numbered point of attachment.
Example to Rule A-52.2


52.3 - If two identical hydrocarbon systems have the same point of attachment and contain substituents at different positions, the locants of these substituents are assigned according to Rule A-2.2; for this purpose an unprimed number is considered lower than the same number when primed. Assemblies of primed and unprimed numbers are arranged in ascending numerical order.
Examples to Rule A-52.3



52.4 - The name "biphenyl" is used for the assembly consisting of two benzene rings.
Examples to Rule A-52.4


See Recommendations'93 R-2.4.4

Rule A-53. Non-identical Ring Systems 

53.1 - Other hydrocarbon ring assemblies are named by selecting one ring system as the base component and considering the other systems as substituents of the base component. Such substituents are arranged in alphabetical order. The base component is assigned unprimed numbers and the substituents are assigned numbers with primes. 53.2 - The base component is chosen by considering the following characteristics in turn until a decision is reached: 
(a) The system containing the larger number of rings.

Examples to Rule A-53.2(a)



(b) The system containing the larger ring.
Examples to Rule A-53.2(b)



(c) The system in the lowest state of hydrogenation (see also Part .3 of this rule).
Example to Rule A-53.2(c)


(d) The order of ring systems as set forth in the list of Rule A-21.1.53.3 - Compounds covered by Part .2(c) of this rule may also be named as hydrogenation products according to Rule A-23

Examples to Rule A-53.3


See Recommendations'93 R-2.4.4

Rule A-54. Three or More Identical Ring Systems 

54.1 - Unbranched assemblies consisting of three or more identical hydrocarbon ring systems are named by placing an appropriate numerical prefix before the name of the hydrocarbon corresponding to the repetitive unit. The following numerical prefixes are used:
3. ter-7. septi-
4. quater-8. octi-
5. quinque-9. novi-
6. sexi-10. deci-

Example to Rule A-54.1


54.2 - Unprimed numbers are assigned to one of the terminal systems, the other systems being primed serially. Points of attachment are assigned the lowest numbers possible.
Examples to Rule A-54.2



54.3 - As exceptions, unbranched assemblies consisting of benzene rings are named by using the appropriate prefix with the radical name "phenyl".
Examples to Rule A-54.3



See Recommendations'93 R-2.4.4

Rule A-55. Radicals for Identical Ring Systems 

(Alternative in part to Rule A-56.1)55.1 - Univalent and multivalent radicals derived from assemblies of identical hydrocarbon ring systems are named by adding "-yl", "-ylene" or "-diyl", "-triyl", etc., to the name of the ring assembly.

Examples to Rule A-55.1




See Recommendations'93 R-2.4.4

Rule A-56. Radicals for Non-benzenoid Ring Systems 

(Alternative in part to Rule A-55.1)56.1 - Radicals derived from hydrocarbon ring assemblies other that benzene ring assemblies by removal of one or more hydrogen atoms from only one ring are named with that ring as the parent radical, the remaining rings being named as substituents.

Examples to Rule A-56.1



Note: This method is used for assemblies of non-identical systems; also it is sometimes preferable to that of Rule A-55 for assemblies of identical systems when a group to be specified as a suffix or as a separate word is present in a chain attached to the ring assembly.See Recommendations'93 R-2.4.4

Spiro Hydrocarbons


Spiro Hydrocarbons 

A "spiro union" is one formed by a single atom which is the only common member of two rings. A "free spiro union" is one constituting the only union direct or indirect between two rings senior. The common atom is designated as the "spiro atom". According to the number of spiro atoms present, the compounds are distinguished as monospiro-, dispiro-, trispirocompounds, etc. The following rules apply to the naming of compounds containing free spiro unions.

Rule A-41. Compounds: Method 1 

41.1 - Monospiro compounds consisting of only two alicyclic rings as components are named by placing "spiro" before the name of the normal acyclic hydrocarbon of the same total number of carbon atoms. The number of carbon atoms linked to the spiro atom in each ring is indicated in ascending order in brackets placed between the spiro prefix and the hydrocarbon name.
Examples to Rule A-41.1



41.2 - The carbon atoms in monospiro hydrocarbons are numbered consecutively starting with a ring atom next to the spiro atom, first through the smaller ring (if such be present) and then through the spiro atom and around the second ring.
Example A-41.2


41.3 - When unsaturation is present, the same enumeration pattern is maintained, but in such a direction around the rings that the double and triple bonds receive numbers as low as possible in accordance with Rule A-11.
Example A-41.3


41.4 - If one or both components of the monospiro compound are fused polycyclic systems, "spiro" is placed before the names of the components arranged in alphabetical order and enclosed in brackets. Established numbering of the individual components is retained. The lowest possible number is given to the spiro atom, and the numbers of the second component are marked with primes. The position of the spiro atom is indicated by placing the appropriate numbers between the names of the two components.
Example A-41.4


41.5 - Monospiro compounds containing two similar polycyclic components are named by placing the prefix "spirobi" before the name of the component ring system. Established enumeration of the polycyclic system is maintained and the numbers of one component are distinguished by primes. The position of the spiro atom is indicated in the name of the spiro compound by placing the appropriate locants before the name.
Example A-41.5


41.6 - Polyspiro compounds consisting of a linear assembly of three or more alicyclic systems are named by placing "dispiro-", "trispiro-", "tetraspiro-", etc., before the name of the unbranched-chain acyclic hydrocarbon of the same total number of carbon atoms. The numbers of carbon atoms linked to the spiro atoms in each ring are indicated in brackets in the same order as the numbering proceeds about the ring. Numbering starts with a ring atom next to a terminal spiro atom and proceeds in such a way as to give the spiro atoms as low numbers as possible after numbering all the carbon atoms of the first ring linked to the terminal spiro atom.
Example A-41.6


41.7 - Polycyclic compounds containing more than one spiro atom and at least one fused polycyclic component are named in accordance with Part .4 of this rule by replacing "spiro" with "dispiro", "trispiro", etc., and choosing the end components by alphabetical order.
Example A-41.7


See Recommendations'93 R-2.4.3

Rule A-42. Compounds: Method 2 

42.1 - (Alternate to Rules A-41.1 and A-41.2) - When two dissimilar cyclic components are united by a spiro union, the name of the larger component is followed by the affix "spiro" which, in turn, is followed by the name of the smaller component. Between the affix "spiro" and the name of each component system is inserted the number denoting the spiro position in the appropriate ring system, these numbers being as low as permitted by any fixed enumeration of the component. The components retain their respective enumerations but numerals for the component mentioned second are primed. Numerals I may be omitted when a free choice is available for a component.
Examples A-42.1




42.2 - (Alternate to A-41.3) - Rule A-41.3 applies also with appropriate different enumeration, where nomenclature is according to Rule A-42.1, but the spiro junction has priority for lowest numbers over unsaturation.
Example A-42.2


42.3 - (Alternate to A-41.5) - The nomenclature of Rule A-41.5 is applied also to monocyclic components with identical saturation, the spiro union being numbered 1.
Examples A-42.3


but

42.4 - (Alternate to A-41.6 and A-41.7) - Polycyclic compounds containing more than one spiro atom are named in accordance with Rule A-42.1) starting from the senior end-component irrespective of whether the components are simple or fused rings.
Examples A-42.4



See Recommendations'93 R-2.4.3

Rule A-43. Radicals 

43.1 - Radicals derived from spiro hydrocarbons are named according to the principles set forth in Rules A-11 and A-24
Examples A-43.1


(cf. Rules A-41.3 and A-11)

(cf. Rules A-42.2)

(cf. Rules A-41.4 and A-24)
See Recommendations'93 R-2.4.3